Table of Contents
Advertisement
6. Compressor Oil
A: OPERATION
NOTE:
Before making repairs, conduct the oil return
operation to return the compressor oil in circulation
with the refrigerant to the compressor.
1) Increase engine rpm to 1,500.
2) Turn ON the A/C switch.
3) Turn the temperature control switch to MAX
COOL.
4) Put in RECIRC position.
5) Turn the blower control switch to HI.
6) Leave in this condition for 10 minutes.
COMPRESSOR OIL
S701294
S701294A16
HVAC System (Heater, Ventilator and A/C)
B: REPLACEMENT
NOTE:
¼ If a component is replaced, add an appropriate
amount of compressor oil.
¼ When replacing the compressor, the new com-
pressor will already have the specified amount of
oil in it. Install the new compressor after removing
the same amount of oil that is remaining in the
compressor removed.
Replacement parts
Evaporator
Receiver drier
Condenser
Hose
AC-25
S701294A20
Amount of oil replenishment
70 m (2.4 US fl oz, 2.5 Imp fl oz)
5 m (0.2 US fl oz, 0.2 Imp fl oz)
50 m (1.7 US fl oz, 1.8 Imp fl oz)
50 m (1.7 US fl oz, 1.8 Imp fl oz)
Advertisement
Table of Contents
