Allen-Bradley MicroLogix 1200 User Manual page 97

Table A.12 General Specifications
Specification
Vibration
Shock
Agency Certification
Hazardous Environment Class
Radiated and Conducted Emissions EN50081-2 Class A
Electrical /EMC:
ESD Immunity (IEC1000-4-2)
Radiated Immunity (IEC1000-4-3)
Fast Transient Burst (IEC1000-4-4)
Surge Immunity (IEC1000-4-5)
Conducted Immunity (IEC1000-4-6)
(1) Conducted Immunity frequency range may be 150 kHz to 30 MHz if the Radiated Immunity frequency range is 30 MHz to 1000 MHz.
Table A.13 Input Specifications
Specification
Approximate Shipping
Weight
(With Carton)
Voltage Category
Operating Voltage Range
Number of Inputs
Bus Current Draw (max.)
Heat Dissipation (max.)
Signal Delay (max.)
Value
Operating: 10 to 500 Hz, 5G, 0.030 in. max. peak-to-peak,
2 hours per axis
Relay Operation: 1.5G
Operating: 30G panel mounted, 3 pulses per axis
Relay Operation: 7G
Non-Operating: 50G panel mounted, 3 pulses per axis
(40G DIN Rail mounted)
C-UL certified (under CSA C22.2 No. 142)
UL 508 listed
CE compliant for all applicable directives
Class I, Division 2, Hazardous Location, Groups A, B, C, D (UL 1604, C-UL under CSA C22.2 No. 213)
The module has passed testing at the following levels:
4 kV contact, 8 kV air, 4 kV indirect
10 V/m, 80 to 1000 MHz, 80% amplitude modulation, +900 MHz keyed carrier
2 kV, 5 kHz
2 kV common mode, 1 kV differential mode
(1)
10V, 0.15 to 80 MHz
1762-IA8
209g (0.46 lbs.)
100/120V ac
79V ac to 132V ac at 47 Hz to 63 Hz 10 to 30V dc at 30°C (86°F)
8
50 mA at 5V dc (0.25W)
2.0 Watts
On Delay: 20.0 ms
Off Delay: 20.0 ms
1762-IQ8
200g (0.44 lbs.)
(1)
24V dc (sink/source)
10 to 26.4V dc at 55°C (131°F)
8
50 mA at 5V dc (0.25W)
3.7 Watts
On Delay: 8.0 ms
Off Delay: 8.0 ms
Specifications
1762-IQ16
230 g (0.51 lbs.)
24V dc (sink/source)<secondary
footnote>(1)
10 to 30V dc at 30°C (86°F)
10 to 26.4V dc at 55°C (131°F)
16
60 mA at 5V dc (0.3W)
4.2 Watts at 26.4V
5.3 Watts at 30V
On Delay: 8.0 ms
Off Delay: 8.0 ms
Publication 1762-UM001D-EN-P - March 2004
A-7