Allen-Bradley MicroLogix 1200 User Manual page 79

(2)
Series C or higher cables are required.
Cable
1747-CP3
(1)
1761-CBL-AC00
(1)
External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
Cable Length
straight 9-25 pin —
(1)
External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
Cable Length
1761-CBL-AS03 3m (9.8 ft)
1761-CBL-AS09 9.5m (31.17 ft)
(1)
External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to cable.
1761-CBL-AC00
Length Connections from
3m (9.8 ft) SLC 5/03 or SLC 5/04 processor, channel
0
45 cm (17.7 in)
PC COM port
PanelView 550 through NULL modem
adapter
DTAM Plus / DTAM Micro™
Port 1 on another AIC+
Connections from
modem or other communication device
Connections from
SLC 500 Fixed,
SLC 5/01, SLC 5/02, and SLC 5/03
processors
PanelView 550 RJ45 port
user-supplied cable
1761-CBL-AS03
Communication Connections
1747-CP3
to AIC+ External
Power Supply
(1)
Required
port 1 yes
port 1 yes
port 1 yes
port 1 yes
port 1 yes
to AIC+ External
Power Supply
(1)
Required
port 1 yes
1761-CBL-AS09
to AIC+ External
Power Supply
(1)
Required
port 3 yes
port 3 yes
Publication 1762-UM001D-EN-P - March 2004
4-15
Power
Selection
Switch
(1)
Setting
external
external
external
external
external
Power
Selection
Switch
(1)
Setting
external
Power
Selection
Switch
(1)
Setting
external
external