Allen-Bradley MicroLogix 1200 User Manual page 92

A-2 Specifications
Table A.1 General Specifications
Description 1762-
L24AWA
L24AWAR
Agency Certification
Electrical/EMC The controller has passed testing at the following levels:
Terminal Screw Torque 0.791 Nm (7 in-lb) rated
(1) Do not allow the total load power consumed by the 5V dc, 24V dc, and sensor power outputs to exceed 12W.
(2) Do not allow the total load power consumed by the 5V dc, 24V dc, and sensor power outputs to exceed 16W.
See Appendix F for system validation worksheets.
Table A.2 Input Specifications
Description
On-State Voltage Range
Off-State Voltage Range
Operating Frequency
On-State Current:
•minimum
•nominal
•maximum
Off-State Leakage Current
Nominal Impedance
Inrush Current (max.) at 120V ac
Publication 1762-UM001D-EN-P - March 2004
L24BWA
L24BWAR
• UL 508
• C-UL under CSA C22.2 no. 142
• Class I, Div. 2, Groups A, B, C, D
(UL 1604, C-UL under CSA C22.2 no. 213)
• CE/C-Tick compliant for all applicable directives/acts
• EN 61000-4-2: 4 kV contact, 8 kV air, 4 kV indirect
• EN 61000-4-3: 10V/m, 80 to 1000 MHz, 80% amplitude modulation, +900 MHz keyed carrier
• EN 61000-4-4: 2 kV, 5 kHz; communications cable: 1 kV, 5 kHz
• EN 61000-4-5: communications cable 1 kV galvanic gun
I/O: 2 kV CM (common mode), 1 kV DM (differential mode)
AC Power Supply: 4 kV CM (common mode), 2 kV DM (differential mode)
DC Power Supply: 500V CM (common mode), 500V DM (differential mode)
• EN 61000-4-6: 10V, communications cable 3V
1762-L24AWA
1762-L40AWA
1762-L24AWAR
1762-L40AWAR
79 to 132V ac
0 to 20V ac
47 Hz to 63 Hz
•5.0 mA at 79V ac
•12 mA at 120V ac
•16.0 mA at 132V ac
2.5 mA max.
12KΩ at 50 Hz
10KΩ at 60 Hz
250 mA
L24BXB L40AWA
L24BXBR L40AWAR
1762-L24BWA, -L24BXB, -L40BWA, -L40BXB
1762-L24BWAR, -L24BXBR, -L40BWAR, -L40BXBR
Inputs 0 through 3
14 to 24V dc
(+10% at 55°C/131°F)
(+25% at 30°C/86°F)
0 to 5V dc
0 Hz to 20 kHz
•2.5 mA at 14V dc
•7.3 mA at 24V dc
•12.0 mA at 30V dc
1.5 mA min.
3.3KΩ
Not Applicable
L40BWA L40BXB
L40BWAR L40BXBR
Inputs 4 and higher
10 to 24V dc
(+10% at 55°C/131°F)
(+25% at 30°C/86°F)
0 Hz to 1 kHz
(scan time dependent)
•2.0 mA at 10V dc
•8.9 mA at 24V dc
•12.0 mA at 30V dc
2.7KΩ