Rackmount Installation; Checking The Rail Kit Accessories; Tools Required - Eaton 9170+ Installation Manual

Rackmount Installation

Checking the Rail Kit Accessories

Tools Required

+
Eaton 9170 Rail Kit (9- and 12-Slot Cabinets) Installation Guide
To install a 9- or 12-slot uninterruptible power system (UPS) cabinet into
a rack, you must order a cabinet specifically designed for rackmounting.
Nine- and 12-slot battery cabinets are also available for rackmounting.
These models can be installed in an EIA-standard 48.3 cm (19")
equipment rack and include a rackmounting kit with the brackets and
required hardware.
Verify that the following items are included inside each rail kit:
S
(2) front rails (left and right)
S
(2) rear rails (left and right)
S
(12) #6-32 0.75" screws
S
(12) #6 flat-head washers
S
(12) #6-32 Keps nuts
S
(4) adapter plates
S
(8) #10-32 0.5" pan-head screws
S
(8) #10 washers
S
9-Slot Cabinets:
- (12) metal clip nuts
- (4) rackmount ears
- (12) 1/4-20 1/2" Phillips-head bolts
S
12-Slot Cabinets:
- (18) metal clip nuts
- (6) rackmount ears
- (18) 1/4-20 1/2" Phillips-head bolts
To assemble the components, the following tools may be needed:
S
Medium flat-bladed screwdriver
S
Phillips #2 screwdriver
®
S 164201420 Rev D Draft 08-Mar-2010 1