Save Profile; Default Lock - Nevco MPCW-7 Control Operator's Manual

The scoreboard will blank
•
The MPCW-7 will display the sport
•
The scoreboard will load
•

Save Profile

Save profile is the second option from within the Profile Options
Set all applicable settings before saving a profile.
It is useful to press the new game key to clear the board before making all of the options changes desired prior to saving a profile. If
you don't blank the board, your profile will be saved with time and score that will be recalled every time the new game key is pressed.
This can be useful if you want the time to be set to 8:00 in basketball for example, or if you prefer the fouls to be '0' by default instead
of <blank>.
1. Upon entry into the Profile Options; Press
2. Press the MPCW-7 will display
a. The profile number here will be the last profile loaded or saved
3. If the displayed profile is the profile required then press
4. If the profile displaying is not the required profile then enter the two digit number of the
profile required.
a. If it is a single digit enter the number and press YES to load
The MPCW-7 will then begin the process of loading a profile.
The MPCW-7 beeper will sound while saving.
•
Mistakes in a saved profile
If a mistake was made in the saved profile's settings simply:
1. Load the profile in question
2. Change the setting
3. Save the profile again

Default Lock

Default Lock is the third option within the Profile Options. When enabled, the control will prevent the user from overwriting the
default profile created at the factory. The following are the default profile numbers for each sport:
Sport
Soccer
Football
Track
Baseball / Softball
Lacrosse
Basketball
Volleyball
Wrestling
Hockey / Field Hockey
To preserve the factory defaults and retain the ability to return the control back to a known state avoid overwriting the factory default
profile numbers.
1. Upon entry into the Profile Options; Press
2. Press to turn the Default Lock off
a. Default Lock automatically turns on each time the control is powered on
b. An asterisk indicates that default lock is turned on
until the MPCW-7 displays
Default Profile ##
88
89
90
91
92
93
94
95
96
until the MPCW-7 displays
33
Save Profile
Profile(##):##
Default Lock*