Time Out Timer; Display Time Out Timer On Scoreboard; Edit Time Outs Menu - Nevco MPCW-7 Control Operator's Manual

TIME OUT TIMER

Time out timer options are:
Display On Scoreboard – If enabled a running time out timer will display on the scoreboard
Edit Time Outs – To change time out times or time out warning times select this option
Press OPTIONS until the MPCW-7 display reads
Press YES to enter main time menu

Display Time Out Timer on Scoreboard

The first selection in the Time Out Timer menu should be the display on scoreboard option.
If required to cycle back to the display on scoreboard screen
To display or not display the time out timer on the scoreboard
Note: the asterisk means that it is enabled

Edit Time Outs Menu

There are 3 options within the "Edit Time Outs" menu
1. Edit Current Time out – There are 5 individual time out timers that can be set individually. The first time out entered is
either the last time out used or defaults to time out timer 1.
2. Edit current warning time – Each time out timer has a settable warning time
3. Next time out – To edit another of the five time out timers.
Press until MPCW-7 display reads
To enter the Edit Time Outs menu
Next Time Out
If the current time out isn't the time out that is desired to be edited:
1. Press until the MPCW-7 display shows
a. The number next to it is the current time out to be edited
2. Press until the MPCW-7 display shows the desired time out to be edited
3. Press to go back to editing that time out
Edit Current Time Out
If the current time out is the time out desired to be edited:
26
TimeOut Timer >>
Disp On Board
Disp On Board*
Edit Time Outs
Time#: ##:##.#
# Next Time Out
Time#: ##:##.#