Score; Adding To Score; Setting Score - Nevco MPCW-7 Control Operator's Manual

SCORE

Press HOME SCORE to enter the home score ADD mode
Press GUEST SCORE to enter the guest score ADD mode.

Adding to Score

1. Press one of the following:
2. The control will display
3. Enter any value 0-9 and it will add that value to the value with the "+".
a. To add more start from step 1
Note:
1. You cannot subtract from the value. To correct a mistake refer to Setting Score

Setting Score

1. Press then one of the following:
2. The control will display
st
3. 1 digit: Enter any value 0-9
a. If that single digit value is the desired setting, then press YES, if not continue to step 4
nd
4. 2 digit: Enter any value 0-9
Note:
1. A zero in the 10's spot will automatically be removed and leave a single digit value.
At any time before the 1's digit is placed
function.
NOTE:
1. For each event 1
2. Home and Guest scores will carry over to the next event
Home Score: #
The control will display
Guest(1,2,or 3)Score: # +
The control will display
,
Home Score:#
Home Score: #
st nd
place = 5 points, 2
, ,
+ Guest(1,2,or 3)Score:#
or
,
,
Guest(1,2,or 3)Score: #
or
can be pressed to restore the previous value and cancel the
rd
place = 3 points, 3 place = 1 point
13
.
+
+
,