Aux Time; Setting Aux Time - Nevco MPCW-7 Control Operator's Manual

AUX TIME

The control has a built in auxiliary timer that can be used for many purposes. It can be configured to
count up or down. It can run continuously or only when the main time is running. It can be displayed on the
control by pressing the time key twice in succession. It can also be configured to display on an auxiliary time
display if one is part of your system. Some uses for the auxiliary timer include timing field/facility usage or it
can be used to determining how far into a game a certain event happened.
Aux Time Options are:
1. Setting Aux Time – Aux time can be set to count down or up from a certain settable time. To set the
time use this option
2. Direction – Aux time can count up or down according to the need or desire of the user. Use this option
to adjust Aux time to run up or down.
3. Time switch Operation – Aux time can be operated with the same time switch used to operate main
time.
4. Setting Aux Stop Time – Aux stop time is functionally the same as stop time for main time. It is the set
time where Aux time will cease counting.
cycling from 99:59.9 to 00:00.0 . It is treated as 100 hours
5. Style – Aux time can be entered in hour/minute format or minute/second format.
To get to Aux Time options:
Press OPTIONS until the MPCW-7 display reads
Press to enter aux time menu

Setting Aux Time

Within Aux Time menu:
1. Press until the MPCW-7 display reads Aux time.
a. If Aux time has never been set up before or Aux time has counted down to zero the
MPCW-7 display will read
2. Press to begin editing Aux time
3. Enter the minutes, seconds, and 10th of seconds.
a. After all five digits are filled it automatically accepts the time.
b. If less than 5 digits are entered and YES is pressed, then zeros will be placed in the
unfilled digits and the time will be accepted.
c. If NO/CANCEL is pressed before all 5 digits are entered it restores the previous
value and completes the editing process
Note: Aux stop time will not stop time if set to 00:00 and Aux Time is
20
Aux Time >>
Aux: 00:00.0
Aux: MM:SS.S