Horn Settings; Horn Volume; Eop Horn Tone - Nevco MPCW-7 Control Operator's Manual

Note: An asterisk indicates which option is enabled

HORN SETTINGS

Each horn type can be changed from a selection of 9 different tones. The horn output volume can be changed as
well. This is done within the horn settings option. (Only available on select models)
NOTE: Horn settings may not affect scoreboards that are not in the outdoor x6xx series.
Tones can be described as:
Tone Setting
Tone = 0, or blank
Tone = 1
Tone = 2
Tone = 3
Tone = 4
Tone = 5
Tone = 6
Tone = 7
Tone = 8
Tone = 9
Press OPTIONS until the MPCW-7 display reads
To enter the Horn Settings menu

Horn Volume

Adjusting the horn volume affects all 5 different horns. To adjust the horn volume:
1. Press if not already on the horn volume screen until the display shows
2. Press the MPCW-7 will display
3. Press the desired volume number key from 0 (muted) to 9 (max), or to disable the horn press
a. Volume is then set.

EOP Horn Tone

This setting will change the EOP (end of period) tone and main stop time tone. To change the tone:
1. Press until the display shows
2. Press the MPCW-7 will display
3. Press the desired horn tone key from 0 to 9; or
Description
Mute
Yelp
Buzzer
Car Horn
Fog Horn
156 Hz
270 Hz
285 Hz
303 Hz
385 Hz
to disable the EOP horn
28
Horn Settings >>
Volume: #
Volume: #
Volume: #
EOP Tone: #
EOP Tone: #