Event; Setting Event; Ft/M (Feet/Meters); Setting Ft/M - Nevco MPCW-7 Control Operator's Manual

EVENT

Press EVENT to display the current event number
The control will display

Setting Event

Press
1.
2. The control will display
st
3. 1 digit: Enter any value 0-9
a. If that single digit value is the desired setting, then press YES, if not continue to step 4
nd
4. 2 digit: Enter any value 0-9

FT/M (Feet/Meters)

Press FT/M to display the current Feet/Meters
The control will display

Setting FT/M

Press
1.
2. The control will display
st
3. 1 digit: Enter any value 0-9
a. If that single digit value is the desired setting, then press YES, if not continue to step 4
nd
4. 2 digit: Enter any value 0-9
rd
5. 3 digit: Enter any value 0-9
Event: #
Event: #
Ft/M: #
Ft/M: #
14