Message Daypart Definitions; Greeter Message Properties; Change Playback Delay Time - 3M XT-1 Operating Instructions Manual

Message Daypart Definitions

Greeter Message Properties

3M™ Wireless Communication System Model XT-1
Operating Instructions
:CHOOSE HEADSETS MESSAGES PLAYBACK TO:
Msg.<011> [Reminder 1
[Headset 1234]<YES>
[XXXXXXXXXXXX]<YES>
3. Using the , , ,  and
record.
Msg.<011>
Note:
Only REMINDER and ALERT messages are available for this function.
Using the , , ,  and
4.
YES/NO field and modify.
Note:
The headsets are given a default name, when registered, of "Headset
SSSS", where SSSS is the last 4 digits of the headset serial number. The
names can be modified in the System
The second step to configuring the greeter module is the messaging dayparts.
This allows the system to play GREETER and REMINDER messages on a pre-
configured schedule automatically. Perform the following procedure to define
the messaging dayparts, specifying the name, start time and end time for each:
1. Enter the greeter configuration menu.
2. Select
4 Message Daypart Definitions
:MESSAGE DAY PART DEFINITIONS:
Message Day Part
01:> Breakfast
02:< Morning
3. Using the , , ,  and
the keypad to modify the Daypart Name, Start Time, and End Time.
Repeat for up to 12 dayparts. The daypart times can be overlapping.
4.
The Greeter Message Properties menu is a collection of settings affecting the
message type GREETER.
5. Enter the greeter configuration menu.
6. Select
5 Greeter Message Properties
:GREETER MESSAGE PROPERTIES:
Playback After Delay Of
Playback Mode:<Alternating>
Playback To The Headsets?<Yes>

Change Playback Delay Time

Playback delay time is the number of seconds between when the vehicle detector
detects a vehicle and when the greeter begins to playback the message.
Perform the following procedure to change the playback delay time:
Appendix: Greeter Module
] [REMINDER]
▐
[Headset 2020]<YES>
▐
[XXXXXXXXXXXX]<YES>
keys, select a message number to
Enter
.
keys, select the desired headset
Enter
[Headset 1234]<NO >
08 Headset Setup
.
Start End
< <06:00> <10:00>
> <10:00> <11:00>
keys, select a message daypart. Use
Enter
.
>00< Seconds.
January 2012 – Revision 1.8
.
menu.


Page 49 of 71