When Completing The Cutting Job; Puma Iii Print Driver Setting; Puma Iii Print Driver Setting>Option Page - GCC Technologies P3-60 User Manual

4.4

When Completing the Cutting Job

After completing the cutting job, raise the sheet-loading lever, and then remove the material.
You can also cut off the finished job by the Safe Blade (a standard accessory) along the knife
guide. (Figure 4-13)

4.5 Puma III Print Driver setting

4.5.1 Puma III Print Driver setting>Option Page
File Function:
The file function section allows users to set the parameters of Speed, Force, Offset and Quality
for later use. This section is useful when performing repeated jobs on a variety of objects,
allowing you to save your frequently used cutter parameters and load them in the future.
• Custom Media: This section lists the files for the parameter settings that you have recently
created and worked. You can save more than 50 files to simplify your cutting job.
• Default: This section contains the reference settings that are applicable with the verified
materials to achieve the best cutting results. Please note that the setting value might need to
be adjusted according to different suppliers of materials.
• SAVE: This function will save current print driver parameter settings to a file under the
specified location on your computer. (Saved parameter setting files will be tagged with the
Puma series extension)
Operation
Figure 4-13
4-8
Puma III User Manual