FMC Technologies AccuLoad II Programming Workbook page 63

Program
Code Function
354 Dual Pulse Error
Count
Note: "000" disables the error counting.
355 Dual Pulse Error
Reset
356 Dual Pulse Flow
Rate Cutoff
357-389
390 Master Meter Factor
391 Linearized Factor
Deviation
392 Meter Factor Variation
58
Code Description
Enter: Three digits indicating
the number of error counts
from the dual pulse Comparator
prior to alarming. (e.g., 050)
Enter: "0" No DPC Error Reset
"1" Reset at the End of Transaction Only
"2" Reset Upon Power-up Only
"3" Reset Upon Power-up and
at the End of Each Transaction
Enter: Three digits defining
the flow rate that the
Dual Pulse errors will begin
to be counted.
Unassigned at Present
Enter: Five digits as one
whole number followed by
four decimals (e.g., 1.0040)
Restricts meter factors 1
through 4, program codes 353, 355,
357, and 359 to +/- 2% of this
entry. Enter 0.0000 to disable
this feature.
Enter: Three digits in
a percentage, one whole number
followed by two decimals
(e.g., 3.40). Restricts deviation
between adjacent meter
factors. Enter 0.00 to disable
this feature.
Enter: "0" No Meter Factor Variation
"1" Yes Meter Factor Variation
Prod 1 Prod 2 Prod 3
______ ______ ______
__ __
_ _ _ _ _ _
_._____ _._____ _._____ _._____
_.___ _.___ _.___
__ __
Issue/Rev. 03 (8/97)
Prod 4
______
__ __
_ _ _ _ _ _
_.___
__ __