FMC Technologies AccuLoad II Programming Workbook page 30

Program
Code Function Code
181 Transaction Security
ID
182 Transaction Security
Prompt Message
183 Auto Reset Timer
184 Ready Mode
Message
185 Run & Ready Mode
Customized Display
Note: This code applies to RBU-05 and above firmware.
186 Power Failure Alarm
Note: This code applies to RBU-07 and above firmware.
187-199
Issue/Rev. 0.3 (8/97)
Description
Enter: Eight digit transaction
ID number (e.g., 12345678)
"00000000" disables this feature
Enter: Up to 20 characters
for a prompt message
(e.g., Enter ID Number)
Enter: Two digit number in
minutes that the AccuLoad II
will remain in the a mode of
operation before automatically
returning to the Ready Mode (e.g., 05)
"00" disables this feature
Enter: Up to 15 characters
for a prompt message
(e.g., Load Arm #1)
Enter: The number of the display
that you want to change.
Press "ENTER" the default
display will appear for that
number or you can scroll through
the displays by pressing the
"ENTER" key. The display can be
changed using the character set
resident in the AccuLoad II. (See
Appendix for entry numbers and to
record translation.)
Enter: "0" No Power Failure Alarm
"1" Power Failure Alarm
(No Local Clearing)
"2" Power Failure Alarm
(Local Clearing Allowed)
Unassigned at Present
Entry
__ __ __ __ __ __ __ __
____________________
__ __
_________________
__
Program
Code
181
182
183
184
185
186
187-199
25