Fronius Symo Service Manual page 144

Replacing the dis- Removing the Recerbo:
play PC board -
Recerbo
144
(1) (1)
(3) (2)
WARNING! Observe the safety
rules (see the beginning of the
"Safety" section)
Take the inverter out of the wall bra-
1
cket, open it and remove the Datama-
nager card (see "Opening and closing
the device" and "Replacing the Data-
manager card" sections)
Disconnect all connections from the
2
Recerbo
Push the Recerbo holder locking de-
3
vices (1) upwards
Remove the Recerbo module
4
NOTE! Take care when carrying
out the next two steps not to dam-
age any of the components
Take the holder (2) off the Recerbo
6
Break off the device data unit (3) from
7
the faulty Recerbo