Fronius Symo Service Manual page 141

(3)
Inserting internal fan 2:
(3)
Use a slotted screwdriver to undo the
4
expanding rivets (3)
Remove the internal fan
5
(3)
Insert the internal fan
1
Use a slotted screwdriver to press in
2
the expanding rivets (3)
(3)
Insert the internal fan module
3
Use a slotted screwdriver to press in
4
the expanding rivets (2)
Connect the fan cable (1) to the EcoPS
5
Close the inverter and place it in the
6
wall bracket (see "Opening and closing
the device")
(2)
Switch on the inverter and then carry out a
fan test via the display (see operating inst-
(1)
ructions)
NOTE! Ensure the flow of air is
away from the fan holder!
141