Operation And Important Riding Points; Starting The Engine - Yamaha MTN850-AH Owner's Manual

Operation and important riding points

1
Read the Owner's Manual carefully to
become familiar with all controls. If
2
there is a control or function you do not
understand, ask your Yamaha dealer.
3
WARNING
4
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
5
or injury.
6
7
8
9
10
11
12
EAU15952
TIP
This model is equipped with:

a lean angle sensor to stop the en-
gine in case of a turnover. In this
EWA10272
case, the engine trouble warning
light will come on, but this is not a
malfunction. Turn the key to "OFF"
and then to "ON" to turn off the
warning light. Failing to do so will
prevent the engine from starting
even though the engine will crank
when pushing the start switch.

an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start switch
to restart the engine.
EAUM3631

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:


1. Turn the key to "ON" and make
7-1
The transmission is in the neutral
position.
The transmission is in gear with
the clutch lever pulled and the sid-
estand up.
See page 5-25 for more informa-
tion.
sure that the start/engine stop
switch is set to " ".
The following warning lights and
indicator light should come on for a
few seconds, then go off.

Oil level warning light

Coolant temperature warning
light

Engine trouble warning light

Traction control system indica-
tor light

Immobilizer system indicator
light
The ABS warning light should
come on when the key is turned to
"ON", and then go off after travel-
EAU77060