Handlebar Switches - Yamaha MTN850-AH Owner's Manual

Instrument and control functions
1

Handlebar switches

Left
2
1
3
4 2
3
5
4
6
1. Pass switch " "
2. Dimmer switch " /
7
3. Turn signal switch "
4. Horn switch " "
5. Traction control system switch "TCS"
8
9
10
11
12
EAU66054 Right
5
1. Start/Engine stop switch "
2. Drive mode switch "MODE"
3. Hazard switch "
"
/ "
Pass switch "
Press this switch to flash the head-
lights.
TIP
When the dimmer switch is set to "
the passing switch has no effect.
Dimmer switch "
Set this switch to "
beam and to "
(See page 8-36.)
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
1
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
2
turned to the center position.
3
Horn switch "
/ / "
Press this switch to sound the horn.
"
Traction control system switch
EAU76731
"TCS"
"
See page 4-1 for an explanation of the
traction control system.
Stop/Run/Start switch "
",
To crank the engine with the starter, set
this switch to "
switch down towards " ". See page
EAU66021
7-1 for starting instructions prior to
/ "
starting the engine.
" for the high
Set this switch to "
" for the low beam.
in case of an emergency, such as when
the vehicle overturns or when the throt-
5-4
EAU66040
/ "
". To signal a left-hand
". When re-
EAU66030
"
EAU73961
EAU66060
/ / "
", and then push the
" to stop the engine