Yamaha MTN850-AH Owner's Manual page 33

Coolant temperature mode
1
1. Coolant temperature display
This display shows the coolant temper-
ature from 40 C to 116 C in 1 C incre-
ments.
If the message "HI" flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 8-40.)
TIP

When the coolant temperature is
below 40 C, "Lo" will be displayed.

The coolant temperature varies
with changes in the weather and
engine load.
Instrument and control functions
Air intake temperature mode
1
1. Air intake temperature display
The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case.
This display shows the air intake tem-
perature from –9 C to 99 C in 1 C in-
crements.
TIP
–9 C will be displayed even if the

air intake temperature falls below
–9 C.

The air intake temperature may
vary from the ambient tempera-
ture.
5-13
Brightness control mode
1
1. Brightness level display
The brightness of the multi-function
meter unit panel can be adjusted.
To adjust the brightness
1. Turn the key to "OFF".
2. While pushing the "SELECT" but-
ton, turn the key to "ON" and con-
tinue pushing the button until the
display switches to the brightness
control mode.
3. Push the "RESET" button to set
the brightness level.
4. Push the "SELECT" button to con-
firm the selected brightness level
and exit the brightness control
mode.
1
2
3
4
5
6
7
8
9
10
11
12