Yamaha MTN850-AH Owner's Manual page 69

1
1. Coolant reservoir cap
4. Add coolant to the maximum level
mark, and then install the reservoir
cap. NOTICE: If coolant is not
available, use distilled water or
soft tap water instead. Do not
use hard water or salt water
since it is harmful to the engine.
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the cooling system will not
be protected against frost and
corrosion. If water has been
added to the coolant, have a
Yamaha dealer check the anti-
freeze content of the coolant as
soon as possible, otherwise the
Periodic maintenance and adjustment
effectiveness of the coolant will
be reduced.
[ECA10473]
Coolant reservoir capacity (up to the
maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
To change the coolant
1. Place the vehicle on a level sur-
face and let the engine cool if nec-
essary.
2. Remove panel B. (See page 8-9.)
3. Place a container under the engine
to collect the used coolant.
4. Remove the radiator cap retaining
bolt, radiator cap retainer and radi-
ator cap. WARNING! Never at-
tempt to remove the radiator
cap when the
hot.
[EWA10382]
8-16
EAU76810
1. Radiator cap
2. Radiator cap retaining bolt
3. Radiator cap retainer
5. Remove the coolant reservoir cov-
er and coolant reservoir by remov-
ing the bolts and collars.
engine is
1
2
2
1
3
3
4
5
6
7
8
9
10
11
12