Removing And Installing Panels - Yamaha MTN850-AH Owner's Manual

Periodic maintenance and adjustment
1
Removing and installing
panels
2 The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
3
this section each time a panel needs to
be removed and installed.
4
5
6
7
8
1. Panel A
2. Panel B
9
10
Panel A
11
To remove the panel
1. Remove the bolt, washer and
12
quick fasteners.
EAU18773
1 2 3
1. Bolt
2. Washer
1
3. Panel A
2
4. Quick fastener
TIP
The quick fasteners are removed by
pushing in the center pin and then pull-
ing the fastener out.
EAU76761
2. Pull the panel off as shown.
4
To install the panel
1. Place the panel in the original posi-
2. Install the washer, bolt and quick
TIP
The quick fasteners are installed by
pushing out the center pin, inserting the
fastener into the panel, and then by
pushing the center pin flush with the
fastener head.
8-9
tion.
fasteners.