Yamaha MTN850-AH Owner's Manual page 32

Instrument and control functions
then push the "RESET" button for
1
one second.

If you do not reset the fuel reserve
2 tripmeter manually, it resets auto-
matically and disappears after re-
fueling and traveling 5 km (3 mi).
3
Instantaneous fuel consumption
4
mode
1
5
6
7
8
1. Instantaneous fuel consumption display
9
The instantaneous fuel consumption
display can be set to either "km/L",
10
"L/100 km" or "MPG" (when the display
units have been set to miles).
11

"km/L": The distance that can be
traveled on 1.0 L of fuel under the
12
current riding conditions is shown.

"L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.

"MPG": The distance that can be
traveled on 1.0 Imp.gal of fuel un-
der the current riding conditions is
shown.
To switch between the instantaneous
fuel consumption display settings, push
the "SELECT" button for one second.
TIP
If traveling at speeds under 20 km/h (12
mi/h), "_ _._" is displayed.
Average fuel consumption mode
1
1. Average fuel consumption display
This display shows the average fuel
5-12
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L",
"AVE_ _._ L/100 km" or "AVE_ _._
MPG" (when the display units have
been set to miles:).

"AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel is shown.

"AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.

"AVE_ _._ MPG": The average
distance that can be traveled on
1.0 Imp.gal of fuel is shown.
To switch between the average fuel
consumption display settings, push the
"SELECT" button for one second.
To reset the average fuel consumption,
push the "RESET" button for one sec-
ond.
TIP
After resetting the average fuel con-
sumption, "_ _._" will be shown until the
vehicle has traveled 1 km (0.6 mi).