Midea MCH2U-18PHH2 Service Manual page 122

6)
after unfastening four fixing
screws.
How to remove the electrical
parts.
3 Electrical
parts
1) Perform work of item 1,2.
2)
of the reactor.
3)
of the compressor.
4) Unfasten the connector of
5)
pieces of connection wires and
connectors between driver
board and PCB.
6) Remove the fixing screws,
then move the driver board.
7)
connectors and wires
Remove the fan motor
Unfasten the connector
Unfasten the connector
the PFC inductor.
Disconnect following 3
CN55-CN7(7p,white)
CN54-CN6(red)
CN53-CN5(black)
Disconnect the
Driver board
122
⑥
PCB board
③
④
CN53
CN54