Preface; Documentation - Tektronix RSA306 Technical Reference

Preface

Preface
Verify the proper manual
This manual applies only to instruments calibrated with Version 1 RF Signal Path Gain Cal. or later. For instruments
calibrated with Version 0 RF Signal Path Gain Cal, use the Specifications and Performance Verification manual Tektronix part
number 077-1030-XX available on the Tektronix web site.
(See page vii, Determining RF signal path gain calibration version.)
The SignalVu-PC software version must be version 3.5.0134 or greater.
Purpose
This manual lists the electrical, mechanical, and environmental specifications, and the certification and compliance
statements for the Tektronix RSA306 USB Spectrum Analyzer. Also provided are procedures for verifying the performance of
the instrument.

Documentation

The following table lists some of the documentation that is available for this product.
Product documentation
Document
Installation and Safety Instructions
Specifications and Performance
Verification Technical Reference
(this manual)
SignalVu-PC application help
RSA306 API Programmer manual
SignalVu-PC Programmer manual
vi
Purpose
Provides software and hardware
installation instructions and
associated safety warnings
Specifications and performance
verification procedures for
checking instrument performance
Using the application and
interpreting the measurement
results
Details on commands used to
control the instrument through an
API
Details on commands used with
the SignalVu-PC application
Location
Printed manual and also available in electronic
format on the product flash drive and at
www.tektronix.com/manuals
Available at www.tektronix.com/manuals
Application help files located within the
application
Available at www.tektronix.com/manuals
Available at www.tektronix.com/manuals
RSA306 Specifications and Performance Verification