Reprogramming The Command Reverse Unit To Restore Features; Maintaining And Servicing Your Locomotive; Lubricating Your Locomotive - Lionel F-3 B-Unit Owner's Manual

Durable locomotive
Hide thumbs Also See for F-3 B-Unit:
Table of Contents

Advertisement

TrainMaster Command operations

Reprogramming the Command reverse unit to restore features

D
ue to inevitable derailments and static,
it is possible that your Command
reverse unit could someday lose its setup
program. The symptom of this condition
would be unresponsiveness in Command
mode. This can be easily remedied by
"reprogramming" your Command reverse
unit using the following steps.
STEP 1: Move the switch on your
locomotive from FWD/RUN to PROG/LOCK.
STEP 2: Plug in your Command Base.
STEP 3: Place the locomotive on track,
then turn on power to your track.

Maintaining and servicing your locomotive

Lubricating your locomotive

H
elp your Lionel locomotive lead a long
and productive life on your railroad by
maintaining it properly.
We recommend that you purchase a
Lionel Lubrication and Maintenance Kit
(no. 6-62927), available from your Lionel
dealer. Two basic rules to keep in mind: never
over-lubricate (a small amount will do), and
Lubricate with Lionel grease
sparingly
Lubricate with Lionel oil sparingly
Figure 2. Lubricating the powered unit
STEP 4: Press ENG, then input the
locomotive's ID#. Press SET.
STEP 5: Press ENG, the ID#, AUX1, then
press 6 for your locomotive.
STEP 6: Turn off power to your track and
wait ten seconds.
STEP 7: Remove the locomotive from your
track, and move the switch from
PROG/LOCK to FWD/RUN.
STEP 8: Place the locomotive back on
track, then turn power on to the track.
STEP 9: Press ENG and the ID#, then
operate as normal.
avoid getting grease or oil on the locomotive's
wheels or your track. You'll know your
locomotive requires lubrication when visual
inspection reveals dryness on the parts
indicated in Figure 2. Remove accumulated
dirt and dust before lubricating, and always
lubricate any locomotive emerging from
prolonged storage.
Underside of F3 B-unit
Lubricate with Lionel grease sparingly
10
Lubricate with Lionel oil
sparingly

Advertisement

Table of Contents
loading

Table of Contents