1-Introduction; Handling Of This Instruction Manual; Safety Instruction - Omron MX2 Series User Manual

Drive Programming

1-Introduction

This Instruction Manual explains how to use the Drive Programming software for the Omron
MX2/RX/LX Series Inverter. Be sure to read this Instruction Manual carefully before using Drive
Programming, and keep it on hand for future reference.

1-1 Handling of this Instruction Manual

- The contents of this Instruction Manual are subject to change without prior notice.
- No part of this Instruction Manual may be reproduced in any form without the publisher's permission.
- If you find any incorrect description, missing description or have a question concerning the contents
of this Instruction Manual, please contact the publisher.

1-2 Safety Instruction

Be sure to read this Instruction Manual, Inverter Instruction Manual, and appended documents
thoroughly before using Drive Programming and the inverter.
Before creating user programs for the inverter, also refer to the Inverter Instruction Manual and
configuration software (CX-Drive) Instruction Manual for the necessary related Knowledge, and
ensure you understand and follow all safety information, precautions, and operating and handling
instructions for the correct use of the inverter.
Always use the inverter strictly within the range of specifications described in the Inverter Instruction
Manual and correctly implement maintenance and inspection to prevent fault from occurring.
When using the inverter together with optional products, also read the manuals for those products.
Note that this Instruction Manual and the manual for each optional product to be used should be
delivered to the end user of the inverter.
In this instruction manual you can find WARNINGS along the instructions
WARNING: Indicates that incorrect handling may cause hazardous situation, which may result in
serious personal injury or death.
5