System Initialization (Reset To Factory Settings); Door Lock Setting - Techsphere VP-II X User Manual

2.6 System initialization (Reset to Factory Settings)

You can reset all system settings back to factory settings. Note: Special caution is required when
executing this function.
Manager Menu > 3. System Settings > 7. Initialization Settings
Init. Configuration
This will initialize all settings back to factory set.
Init. Database
This will delete all User data in the database. Users' vascular data, control information and time zone
tables will be deleted.
Init. Events
All User transaction records and system logs will be deleted.

2.7 Door lock Setting

When the VP-II XG is used as the door controller, the door lock is used for closing or opening the door.
In this case, the door lock system has a built in sensor to control the door, but in some cases the door
lock may not have this sensor.
If this is the case, the VP-II XG can provide the signal to the door lock for opening or closing the
door. This is done by selecting "Use the external sensor of the door lock" option.
Manager Menu > 3. System Settings > 8. Door lock Setting
30