Chapter 2 Enrollment, Deletion And Verification; Manager Menu; Manager; Installer - Techsphere VP-II X User Manual

Chapter 2 Enrollment, Deletion and Verification

1. Manager Menu

It is required to access the Manager Menu in order to enrol/delete Users or change system setup. The
Manager menu can only be accessed by a Manager or an Installer. The VP-II X is set to the Test Mode
when delivered, which enables an Installer to be enrolled as a Manager.

1.1 Manager

Manager(s) is an administrator who has the right to enrol/delete Users as well as to setup or change
system settings. When a Manager is verified, the Manager Menu automatically appears on the LCD.

1.2 Installer

Installer is a temporary Manager who can be enrolled when the VP-II X is under Test Mode. An Installer
has the same right as Managers, and can access the Manager menu to setup/change system settings as
well as enrol/delete Users. Typically an Installer is temporary enrolled as a Manager for system setup for
installation, and it is recommended that the Installer be deleted once the installation is completed. Only a
PIN is allowed to be used for Installer, and no cards are allowed to be used for enrolling an Installer while
both cards and PIN are allowed to enrol Manager(s).

1.3 Test Mode

Test Mode is a factory default set when the VP-II X is delivered. Under Test Mode, the VP-II X brings a
menu allowing an installer to be enrolled as a Manager each time the VP-II X starts up. As this means
that anyone can be enrolled as a Manager as long as the unit is under Test Mode by recycling the power,
it is strongly recommended that the system Manager release the Test Mode once the installation is
completed.

1.4 Enrolling an Installer

When the VP-II X is under Test Mode, the below menu appears every time it starts up. Press ENT to
enrol an Installer (system Manager), and then enter a PIN and hand twice in accordance with the
displayed instructions. Press ESC to skip enrolling an Installer and directly go to the main screen.
Only one Installer is allowed to be enrolled on each unit. It will overwrite an existing Installer if you enrol a
new Installer to the same unit. However, each unit in the same network can have different Installer with
different PINs.
12