Multiple Template Assignment; Smart Card Update - Techsphere VP-II X User Manual

This eliminates the need to re-enter existing information such as User name (in the NetControl-X
database), expiration time, etc, this information will all be maintained in the database.
This function is not applicable for smart card Users. For a smart card User please see "Chapter 2 5.2.3
Smart Card Update" to update its vascular data.

5.2.2 Multiple Template Assignment

A User can have up to two templates. This function enables a User to enrol both right and left hands or
enrol one hand twice.
This function may be used to enrol the same hand twice at different time, e.g. one in winter season and
another one in summer season, in order to minimize false rejections that could be caused by minor
changes of the extracted vascular pattern features due to cold and hot weather conditions. The second
template can be also used for duress verification. See "Chapter 2 4.6 Verification With Duress Code" for
details on duress verification.
Go to the menu as shown below:
Manager Menu > 1. User Management > 4. Template Management
After selecting the menu, enter a PIN or present a card of the User to proceed with. Please make sure
that the master unit is in operation if this function is being performed on a slave unit. If the master unit is
not able to be connected to on the network, this function will not work as the slave cannot update the
User data to the database in the master.
The Template number shows the number of enrolled vascular data (templates). It means only one
template is enrolled if only "1" is marked, and both "1" and "2" will be marked if there are two templates
enrolled.
To enroll the second template when there is only one template enrolled (only "1" of the template number
is marked), select "2" from Select Number menu and execute Add/Re-enroll. It will automatically allow
you to enrol the second template.
To update the vascular data, just select template number 1 or 2 (if enrolled) and execute Add/Re-enroll.
To delete the second template, select template number 2 and execute Delete. (Template 1 cannot be
deleted in this menu. Use "Delete User" menu to delete Users).

5.2.3 Smart Card Update

This menu allows for smart card Users vascular data to be updated. From the Manager menu select 1.
"User Management" and then 6 "Smart Card Update".
Manager Menu > 1. User Management > 6. Smart Card Update
23