Slave List - Techsphere VP-II X User Manual

Set the server IP, Port and Heartbeat time in the same manner as Master/Slave set in the above section.
Backup Master Function
For applications that customers do not want user information and template storage on the slave devices,
the "DB Sync. Function" needs to be disabled; the slave devices will not store any user information in
devices. Please refer "Chapter 3 1.2 Master/Slave Setting" for "DB Sync. Function" settings. To verify
users' vascular patterns, the user's present their hand to a slave device, the slave will communicate to a
master VP-II X or server where the enrolled template is stored to verify their hand. Please refer to
"Chapter 3 3.6" for instructions to set the verification location to "Only Network".

1.4 Slave List

This function is only available for master units. You can check, add or delete the list of slaves being
managed by the master. The MAC address is used for the list. The slave list is automatically created
when configuring using the XConfig software, or it can be manually set by this menu.
Manager Menu > 3. System Settings > 1. Network Settings > 4. Slave List
26