Password User Verification; Job Code Input; Verification With A Card Number; Verification With A Function Key - Techsphere VP-II X User Manual

When a Manager is verified, VP-II X brings up the Manager Menu automatically; Note: When a Manager
is verified the VP-II X does not provide a Wiegand output or door open signal.

4.2 Password User Verification

It is not required for password Users to verify utilizing their hand vascular pattern. Password Users can
gain access with only a password assigned at enrolment in combination with a PIN or card.
To verify a password User, (1) enter a PIN or present a card, (2) press F2 to proceed with a password
input, and (3) Place a hand and push the trigger switch (VP-II X does not verify a hand but the User is
required to trigger the switch).

4.3 Job Code Input

When the VP-II X is used for time and attendance applications and a job code is required to be input, a
User can input a job code prior to verifying a hand. Only numerals can be used for jog codes; e.g., 1234,
20000, or 6666666.
To enter a job code, (1) enter a PIN or present a card, (2) press F3 to proceed with a job code input, and
(3) place a hand.

4.4 Verification With a Card Number

This function allows a proximity card User to enter the card number directly instead of presenting a card.
To use this function, a proper Wiegand format (parity bits, facility code, and bit length of the card serial
number) should be set in advance. Please refer to "Chapter 3 5.1 Wiegand Setting" for details on how to
set Wiegand format.
To verify with a card number, (1) enter the card number using the keypad, (2) press F4 to proceed with
card number verification, and (3) place a hand.

4.5 Verification With a Function Key

Function keys are typically used for time and attendance purposes. If used, Users are required to press a
function prior to entering a PIN or presenting a card.
(1) Press a function key (F1 ~ F4), (2) Enter a PIN or present a card, and (3) Place a hand
VP-II X sends the function key information (none, F1, F2, F3 or F4) to the NetControl-X software along
with a User transaction event. The usage of each function key, F1 for punch-in and F2 for punch-out as
an example, shall be assigned by the NetControl-X.
As for more advanced time and attendance applications, the function keys may be customized in order to
be used for multi-level job code transfers, viewing of individual punches, etc.

4.6 Verification With Duress Code

VP-II X provides a function that can generate an alert alarm when a User is forced to gain access. There
are two ways to generate a duress code.
First method is to press ENT key prior to entering a PIN or presenting a card. To generate an alert alarm,
(1) Press ENT key, (2) Enter a PIN or present a card, (3) Place a hand.
The second method is to enrol both hands for the User and to use one of enrolled hands as duress
verification/notification. VP-II X allows a User to enrol two hands. Please refer to "Chapter 2 5.2.2
"Multiple Template Assignment" for details on how to enrol two hands for one User, and "Chapter 2 5.1
Edit User" to learn how to assign a hand for duress verification.
20