User/Manager Enrolment; Enrollment Options - Techsphere VP-II X User Manual

2.2 User/Manager Enrolment

When a User is enrolled on a slave unit, the master unit must be in operation. The enrolment function is
not permitted if the slave cannot reach the master on the network. A User once enrolled on any unit will
be automatically distributed to all the units in the network.
To enrol a User or Manager, access the Manager Menu and go to the menu as follows:
Manager Menu > 1. User Management > 1. Enroll User
After setting User Class and Level (or keep the default settings which are User and System Level),
execute Enroll to start enrollment process. And then follow the steps shown on the display. It will first ask
you to enter a PIN (from 2 to 24 digits) or present a card (Proximity or smart card), and then place a hand.
This process is required to take place twice in order to make sure that the entered ID and vascular data
are accurate.

2.2.1 Enrollment options

User Class
Select User or Manager to enroll. Multiple Managers can be enrolled.
Level (Security level)
Select a level from 1 to 5 to assign a Personal Security Level to the User being enrolled, or select
System Level for the User to use the level set to the unit. It is recommended that you use the default
which is System Level for the Users who are initially enrolled to the VP-II X. You can later assign a
16