Siemens SITRANS F MASS 6000 Ex d Operating Instructions Manual page 21

SITRANS F C MASSFLO
Keypad
Display
20
T
FORWARD KEY
BACKWARD KEY
CHANGE KEY
SELECT KEY
L
S:
P:
The centre line is the title line (T) with individual information according to the selected operator
or setup menu.
The lowest line is the subtitle line (ST) which either will add information to the title line or keep
individual information independent of the title line.
F: The alarm field. Two flashing triangles will appear by a fault condition.
M: The mode field. The symbols indicate the following.
Communication mode
Service mode
Operator menu
Product identity
Language mode
Ready for change
Value locked
A5E02944883-A
This key (hold 2 sec.) is used to switch between operator
menu and setup menu. In the transmitter setup menu, a short
press will cause a return to the previous menu.
This key is used to step forward through the menus. It is the
only key normally used by the operator.
This key is used to step backward through the menus.
This key changes the settings or numerical values.
This key allows the operator to change settings and gives
access to submenus.
Basic settings
Output
External input
Sensor characteristic
Reset mode
Access to submenu (Press
RESET MODE: Zero setting of
)