Download Print this page

Sensorprom Unit - Siemens SITRANS F MASS 6000 Ex d Operating Instructions Manual

Coriolis flowmeters
Hide thumbs Also See for SITRANS F MASS 6000 Ex d:

Advertisement

SITRANS F C MASSFLO
1
OK
2
Applied
3
Install
4
OK
20
Reset manually
20
Reset manually
21
22
23
24
30
31
32
33
34
35
36
40
Insert
41
Switch off and on
42
Check cables
43
Switch off and on
49
Switch off and on
50
Check cable
51
Check cable/install.
52
Check cable/install.
60
Transmitter/add-on module
61
Replace
62
Replace
63
Replace
70
71
80-83
84
97
Error code level:
W = Warning, F = Fatal, P = Permanent
A5E02944883-A
Power on has activated
A new module has been added to the system
An add-on module is defect or has been removed.
This can also be an internal add-on module
A less vital parameter in the transmitter has been re-
placed by its default value
value has failed. It is not possible to rely on the
must be reset manually in order to rely on future
readings
value has failed. It is not possible to rely on the
must be reset manually in order to rely on future
readings
settings
max.
Pipe is empty
Current output exceeds 120%. Ensure that the sensor is
Freq/Pulse output exceeds 120%. Ensure that the sensor
SENSORPROM unit not installed
A parameter is out of range.
The error will disappear at the next power-on
Current loop is disconnected or the loop resistance
is too big
Internal error
Too many errors occured at the same time.
Some
are not detected correctly
Error in temperature sensor, check cables and
connectors
Pick-up 1 amplitude too low. Check cables or application
for damping (air/gas in liquid)
Pick-up 2 amplitude too low. Check cables or application
for damping (air/gas in liquid)
CAN bus communication error. An add-on module, the
display module or the transmitter is defect
It is not possible to rely on the data in SENSOR-
PROM unit
The SENSORPROM unit ID do not comply with the
product ID. The SENSORPROM unit is from another
type of product SITRANS F C MASSFLO,
It is not possible to read from the SENSORPROM
unit
Check cables/polarity
Check cables/polarity
Restart or replace
Pick-up amplitud saturated
Replace
Active
Active
Active
Active
Active
Active
Max. 120 %
Zero
C)
Active
C)
Active
Active
Active
Active
Active
Active
Active
Active
Active
Zero
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Inactive
Active
Active
Active
Active
Active
Active
Active
27

Advertisement

loading