Modifying the Throttle Stick to a Ratchet Type
Self neutral type
(Normal)
A throttle stick returns
neutrally by a spring.
Open the transmitter front case and modify the stick section.
*
③ Remove the
spring and
swing arm.
28
2HR Functions
① Remove the four transmitter
r e a r c a s e s c r e w s a n d
remove the front case.
Spring
Swing Arm
Throttle
Stick
Ratchet type
② Move the setting lever at
the throttle stick body to the
outside.
Screw
Ratchet Plate
⑤ Close the front case while being careful
that the stick levers, trim levers, power
switch, LEDs, and battery contacts do
not get caught. And tighten the four
screws.
A throttle stick
doesn't return
neutrally.
④ Install the
ratchet plate
with the screw.