FUTABA 2HR Instruction Manual page 3

Thank you for purchasing a Futaba FHSS 2HR 2.4GHz system.
This system is based on the combination of the newly developed 2.4GHz transmitter
and its corresponding receiver. Before using your 2HR 2.4GHz system, read this manual
carefully and use your R/C set safely.
After reading this manual, store it in a safe place.
FHSS 2HR 2.4GHz system
• Frequency channel setting unnecessary: Shifting the channels within the 2.4GHz band
automatically, this system minimizes the interference from other 2.4GHz systems.
• FHSS (Frequency Hopping Spread Spectrum) minimizes interference from other 2.4GHz
systems. This system is not compatible with FASST.
1. This product may be used for models only. It is not intended for use in any application other than the
control of models for hobby and recreational purposes.
2. Exportation precautions:
(a) When this product is exported from the country of manufacture, its use is to be approved by the laws
governing the country of destination which govern devices that emit radio frequencies. If this product is
then re-exported to other countries, it may be subject to restrictions on such export. Prior approval of the
appropriate government authorities may be required. If you have purchased this product from an exporter
outside your country, and not the authorized Futaba distributor in your country, please contact the seller
immediately to determine if such export regulations have been met.
(b) Use of this product with other than models may be restricted by Export and Trade Control Regulations,
and an application for export approval must be submitted.
3. Modification, adjustment, and replacement of parts: Futaba is not responsible for unauthorized
user's authority to operate the equipment.
Compliance Information Statement (for U.S.A.)
This device, trade name Futaba Corporation, model number T2HR-2.4G, complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
(3) This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator and
your body.
The responsible party of this device compliance is:
Futaba Service Center
3002 N Apollo Drive Suite 1, Champaign, IL 61822 U.S.A.
TEL (217)398-8970 or E-mail: support@hobbico.com (Support)
TEL (217)398-0007 or E-mail: futabaservice@hobbico.com (Service)
Battery Recycling (for U.S.A.)
The RBRC
indicates that Futaba Corporation of America is voluntarily participating in an industry program to collect
and recycle these batteries at the end of their useful lives, when taken out of service within the United
States. The RBRC
into the trash or municipal waste system, which is illegal in some areas.
You may contact your local recycling center for information on where to return the spent battery. Please call
1-800-8-BATTERY for information on Ni-Cd/Ni-MH battery recycling in your area. Futaba Corporation of America's
involvement in this program is part of its commitment to protecting our environment and conserving natural resources.
TM
RBRC is a trademark of the Rechargeable Battery Recycling Corporation.
TM
SEAL on the (easily removable) nickel-cadmium battery contained in Futaba products
TM
program provides a convenient alternative to placing used nickel-cadmium batteries