Microgate Optogate User Manual page 77

Test List
Click on the column names (Patient, Test, Data) to display the list in order according to that field.
Press again to reverse the order (A...Z, Z...A).
To delete a test, press the
displayed tests press
To select a test to analyse, press the symbol
mouse): the test will be moved from the LIST table to the ANALYSIS table and a filter will
automatically be set on the type of test (e.g., if a 'Squatjump' test is chosen, the Test List is filtered
in order to contain only 'Jump tests'; this allows you to choose only tests of the same type to submit
to 'Comparison').
To add all displayed tests, press
To make multiple selections, use the SHIFT key to select a range of patients (from... to...) or the CTRL
key for selections that are not adjacent, as explained in section. 4.1.2. Pressing
the selected tests, while pressing
Figure 59 – Multiple selection
Version 1.9
Figure 58 – Test List Components
symbol on the corresponding line of the chosen test; to delete all
on the table heading.
on the table heading.
will delete those lines.
on the corresponding line (or double-click with the
will move only
Page 77 of 170