History - Microgate Optogate User Manual

4.3.3 H
ISTORY
The History section allows you to analyse a patient's progress by graphically and numerically
analysing a series of tests. Alternatively it can be used to analyse the members of a patient group
by comparing them in a test of the same type.
Select two or more tests (generally of the same type or uniform in order to ensure plausible data)
and press <History>. It is possible to first decide the sequence with which to view the progress in
(usually chronological) by clicking on one of the column headers (e.g. Date) and then clicking on the
<History> button.
Figure 90 –History analysis of three tests ordered by data
Pressing <Configure> allows you to choose which value to consider for progress analysis: it is
possible to select one of the N jumps or he average, best, worst or standard deviation value.
If the tests had a defined starting foot, it is possible to view the data and progress graphs for only
one foot or the difference of both feet.
Clicking on the column headers, data are ordered by measure and the graph is updated; this is very
useful, for example, to order the team members from the worst to the best value of any parameter.
It is possible to use the History module also on a single test (usually a run/gait test where the starting
foot has been set), where it is possible to spot asymmetries between the right and left foot using
the option 'Diff%'.
Version 1.9 Page 105 of 170