Microgate Optogate User Manual page 76

Filters Panel
With the 'Data' radio button, select whether single tests, protocols or analyses should be viewed.
In the latter case, with the and icons expand or collapse the tests contained in the protocols.
Figure 56 – Expanded Protocols List
Choosing 'Analyses', all saved analyses will be viewed with the saving date (which can be much later
than the execution of the analysed tests).
Figure 57 – Saved Analyses
To look for a patient or a test/protocol, the data can be inserted manually into the search boxes
(e.g., key in 'Rossi' in the Patient field or 'CMJ' in the Test field) or press to display a list of patients
or tests to choose from. Similarly, it is possible to filter by data by inserting a range of data with the
calendar control.
The 'Test type filter' radio button can be used to apply an automatic filter to the test type: for
example, if 'Jumps 15 seconds' is selected for test analysis, the list on the left-hand side will only
show 'Jump Test' types and all others (gait, run, tapping, etc.) will be hidden. This makes it easier to
select other tests of the same type for comparison or history purposes. If, on the other hand, you
do not want to use this automatic filter (for example, when selecting a variety of tests to export),
set the filter to 'Disabled'.
To view all the tests and reset the various filters, press <Delete filter>.
Version 1.9 Page 76 of 170