Results - Microgate Optogate User Manual

4.3 R
ESULTS
Figure 55 – Results
In the Results section, the performed tests or protocols are displayed. For better understanding,
these three terms are defined as follows:
Test is a single test (e.g. 15" jumps) performed on a certain date by a single patient.
Protocol: is a pre-defined list of tests to perform in sequence.
Analysis: when a single test is displayed or when two tests are compared, certain configuration
parameters may be set for the video, the table with numerical data, charts, reports, printouts, etc.
It is furthermore possible to draw on still pictures, insert notes, 'sign', delete incorrect data, etc. All
these operations can be saved in an Analysis (using a mnemonic name), which can then be recalled
without having to reset all parameters.
The RESULTS window is divided into 3 parts (from left to right):
 FILTERS: panel for looking for a single test or for filtering according to various parameters
 TEST LIST: contains all the tests made, possibly filtered by your parameters; the same
window also displays the list of saved analyses
 TEST ANALYSIS: contains the tests/analyses manually selected for viewing, comparing,
printing, or exporting.
Version 1.9 Page 75 of 170