Top Panel
See Top Panel Location on page 16.
Top Panel Removal
1. Disconnect power from the unit.
2. Remove the control panel.
See Control Panel Removal on page 20.
3. Remove the four 1/4 in. hex head top panel
screws.
4. Lift the front of the top panel up approximately
6 inches, then push the top panel backward
slightly, then lift the panel to remove.
Structural Components
24
Front Panel
See Front Panel Location on page 16.
Front Panel Removal
1. Disconnect power from unit.
2. Remove the door assembly.
See Door Removal on page 28.
NOTE: It is not necessary to remove the door un-
less the front panel is being replaced. However,
removing the door will reduce the weight of the
front panel.
3. Remove the three #2 Phillips screws located near
the lint trap.