Gas Conversion - GE GFDR485GF Technical Service Manual

with gas, as shown below.
Safety Valve Open
below.
Electrical Operation
L1
IGNITOR
(GLOWING RED)
BOOSTER
SAFETY
Flame Detector Closed
When the igniter reaches ignition temperature (ap-
opens. This causes the main coil to be in series with
the igniter, which causes the igniter to cool down.
series with the main coil, and is essentially inopera-
tive.
N
DETECTOR
MAIN
45
L1
IGNITOR
(NOT GLOWING)
BOOSTER
SAFETY
Flame Detector Open
Should a momentary power failure occur, the valve

Gas Conversion

To convert the dryer from natural gas to LP gas,
refer to the conversion kit (Part #: WE25X10032).
To convert the dryer from LP gas to natural gas, refer
to the conversion kit (Part #: WE25X10033).
Gas Valve
See Gas Valve Location on page 44.
Operating Voltage: 120 VAC
Booster Resistance
Safety Resistance
Main Resistance
The gas valve and coils come as a complete assem-
bly, coils are not available as a separate part.
Gas Valve Removal
1. Disconnect power from the unit.
2.
N
DETECTOR
MAIN