Aruba AP-274 Installation Manual page 14

5. On the AP-274, install the external antennas according to the manufacturer's instructions, and connect
the antennas to the antenna interfaces on the AP.
Mounting the AP to a Vertical Pole
The mounting bracket provides different slots for pole mounting according to the diameter and shape of the
pole as shown in
1. Begin by attaching the mounting bracket to the vertical pole as shown in
a. Pass a hose clamp through the two slots on the mounting bracket, attach the mounting bracket to the
pole and tighten the clamp by using a screw driver to twist its screw head. Two hose clamps are
included in the mount kit.
b. Use another hose clamp at the other two slots on the mounting bracket.
Figure 18 Attaching the Mounting Bracket (AP-270-MNT-V1) to a Vertical Pole
Figure 19 Attaching the Mounting Bracket (AP-270-MNT-V2) to a Vertical Pole
2. Slide the holder of the AP into the opening of the bracket and use the two screws to fix the holder as
shown in
14
Figure 18 or Figure 19.
Figure 20 or Figure 21.
Figure 18
AP-270 Series Outdoor Access Point
or Figure 19.
| Installation Guide