Additional brake light*
Given the difficulty involved in the replace-
ment of this light it should be done by Tech-
nical Services.
Interior light and front reading lights
Fig. 101
Front reading light.
To remove the glass
Insert a fine screwdriver between the cas-
–
›››
Fig.
101.
ing and the glass
Carefully remove the glass, levering it to
–
avoid possible damage.
To replace the bulbs
Pull the bulbs outwards.
–
To remove the central bulb, hold and press
–
to one side.
Fuses and bulbs
Assembly
Proceed in the reverse order, pressing gen-
–
tly on the outer edge of the side light.
First fit the glass with the fastening tabs
–
over the frame of the switch. Next press the
front part until the two long tabs click on
the support.
Luggage compartment light*
Boot light.
Fig. 102
Boot light.
Fig. 103
Extract the bulb by pressing on its inside
–
edge -arrow- using the flat side of a screw-
›››
driver
Fig.
102.
Press the bulb sideways and remove it from
–
›››
its housing
Fig.
103.
85