Remove the cover
Raise the bonnet.
–
›››
Move the loop
Fig. 85
–
of the arrow and remove the cover.
Changing the dipped/main beam headlight
›››
Remove connector
Fig. 86
–
bulb.
Unclip the retainer spring
–
pressing inwards to the right.
Extract the bulb and fit the replacement so
–
that the lug on the base fits into the recess
on the reflector.
Fit the connector.
–
Fit the cover and close the strap. Make sure
–
that the gasket sits well on the casing cover
during the operation.
Check whether the new bulb is working.
–
Changing the side light
Extract the bulb holder
–
wards.
Remove the bulb by pulling it out and fit-
–
ting the new one.
Installation involves all of the above steps
–
in reverse sequence.
Fit the cover and close the strap. Make sure
–
that the gasket sits well on the casing cover
during the operation.
80
Check whether the new bulb is working.
–
in the direction
1
Double headlight bulb change
Position of the bulbs
from the
3
›››
Fig. 86
2
Fig. 87
Side lights
A
Main beam headlights
B
Dipped beam headlights
C
›››
Turn signal
Fig. 86
out-
D
4
DRL (LED day light)
E
Emergencies
Double headlight.
Side light and main beam
Fig. 88
Double headlight.
Side light and main beam headlights.
Fig. 89
Remove the cover
Raise the bonnet.
–
Move the loop
in the direction of the ar-
–
1
›››
row and remove the cover
Fig.
88.