Changing the tail light bulbs
Changing the tail light bulbs
Fig. 98
Changing the tail light bulbs
Fig. 99
●
Remove the connector from housing
›››
Fig.
97.
●
Remove the bulb holder, separating it from
the casing. To do this, press tabs
›››
direction of the arrows
84
●
When the bulb holder has been removed,
press in the direction of the arrow
the same time, turn in the direction of the ar-
row
2
Changing bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
Changing the side and interior
bulbs
Turn signals
A
in the
B
Fig. 100
Fig.
98.
Emergencies
and at
1
›››
Fig. 99
Turn signals.
Press the turn signal to the left or to the
–
right to remove the bulb.
Remove the bulb holder from the turn sig-
–
nal.
Remove the failed bulb and replace with a
–
new bulb.
Insert the bulb holder in the turn signal
–
guide until it clicks into place.
First fit the turn signal in the opening in the
–
chassis, fastening the tabs
1
and then fit in the bulb as shown by the ar-
›››
Fig.
100.
row
2
Number plate light
Insert the flat part of a screwdriver into the
–
special slot and remove the bulb.
Remove the bulb holder, by turning it until
–
it is free.
Change the bulb.
–
Replace the bulb holder, by turning it until
–
it fits fully.
Fit the light into the space and press until
–
you hear a "click".
›››
Fig.
100,