Receiver Installation; Steering - Ko Propo EX-II Instruction Manual

● Receiver Installation
1.
Install the receiver, servo, and ESC (in the case
of an electric car) onto your machine and connect
them. Install the receiver while taking noise into
consideration （p.11）.
※ Carefully read the instructions included with the
servo and ESC before installing and using them.
2.
Install batteries into the transmitter's battery box
（p.9）.
In the case of an electric car, install battery pack.
In the case of a glow engine car, install battery for
receiver.
3.
For 2.4GHz systems, conduct pairing of the
transmitter and receiver .
※ In order for the receiver to operate, it must
store the transmitter's unique ID in its memory
in a process called "pairing." Even if a single
transmitter is used to control multiple receivers,
each receiver must go through the pairing process
with the transmitter before being used for the first
time.
4.
Adjust steering （p.18） and throttle/braking （p.19） .
5.
Set the Fail-Safe Function（p.15）.
● For an Electric Car
● Battery Pack
(Sold Separately)
● Steering Servo (CH1)
(Sold Separately)
● Receiver
● For a Glow Engine Car
● Steering Servo (CH2)
(Sold Separately)
● Steering Servo (CH1)
(Sold Separately)
This transmitter is only compatible with digital servos.
Correct operation is not possible when used with analog
servos.
For items which are not included in this product, please
refer to the KO Propo website for a list of compatible
products. (http://www.kopropo.co.jp)
● Motor
(Sold Separately)
● ESC (CH2)
(Sold Separately)
● Battery for Receiver
(Sold Separately)
● Receiver
12