Schlage ND10 Service Manual
  1. Manuals
  2. Brands
  3. Schlage Manuals
  4. Door locks
  5. ND10
  6. Service manual

Schlage ND10 Service Manual

Hide thumbs Also See for ND10:
Table of Contents

Advertisement

Quick Links

ND-Series
Service manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ND10 and is the answer not in the manual?

Questions and answers

Related Manuals for Schlage ND10

Summary of Contents for Schlage ND10

  • Page 1 ND-Series Service manual...

  • Page 2: Table Of Contents

    — Electrically locked (fail ® secure) or electrically unlocked (fail secure) with request- safe) or electrically unlocked (fail secure) with request- to-exit to-exit Corridor lock with Vandlgard ® Corridor lock with Vandlgard ® Schlage • ND-Series service manual • iii...
  • Page 3 Screws, screw packs and special parts Installation tools and kits 105 Electrified locks ND-Series EL, electrically locked (fail safe) Allegion Connect 106 Request-to-exit feature 107 Finishes Finish codes and descriptions 107 Ordering procedures 108 Limited warranty iv • Schlage • ND-Series service manual...

  • Page 4: Introduction

    This manual contains a complete listing of ND-Series (Grade 1) cylindrical lock parts and assemblies manufactured by the Schlage Lock Company. This edition lists components of ND-Series locks manufactured afer February, 2017. This manual provides exploded views of each lock chassis and trim assembly with an accompanying chart to identify parts for replacement purposes, along with lock trim ordering procedures, general cylinder information, and all auxiliary components of the ND-Series cylindrical locks.
  • Page 5 New component and assembly part numbers are indicated with a "" symbol and highlighted in gray throughout this manual. • For detailed lists of original and new parts and assemblies, and kits for lock conversion, refer to Conversion on page Parts and kits on page 95. 6 • Schlage • ND-Series service manual...

  • Page 6: Lock Assembly Drawing Index

     Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Schlage • ND-Series service manual • 7...

  • Page 7: Chassis

     Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 8 • Schlage • ND-Series service manual...
  • Page 8  Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Schlage • ND-Series service manual • 9...
  • Page 9  Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 10 • Schlage • ND-Series service manual...
  • Page 10  Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Schlage • ND-Series service manual • 11...
  • Page 11 12 • Schlage • ND-Series service manual...

  • Page 12: Passage Latch

    Chassis Passage latch Passage latch with request-to-exit Exit lock Exit lock with request-to-exit Exit lock— Electrically locked (fail safe) or electrically unlocked (fail secure) Exit lock— Electrically locked (fail safe) or electrically unlocked (fail secure) with request-to-exit 20 Single dummy trim Exit lock with blank plate Special—...
  • Page 13 Adjustment plate N523-054 Outside housing 24088544 Spindle N523-177  Inside hub 24085037 Gauge insert 23988066 Slide N523-149 Insert, inside hub N523-160* Not sold separately as a part.  Designates new parts or assemblies. 14 • Schlage • ND-Series service manual...
  • Page 14 Slide N523-149 Gauge insert 23988066 Slide clip N523-025 Insert, inside hub N523-160* Not sold separately as a part. Request-to-exit feature 106. For RX details, see on page  Designates new parts or assemblies. Schlage • ND-Series service manual • 15...
  • Page 15 Adjustment plate N523-054 Spindle N523-013 Spindle N523-177  Outside housing 24088544 Gauge insert 23988066 Inside hub 24085037 Insert, inside hub N523-160* Not sold separately as a part.  Designates new parts or assemblies. 16 • Schlage • ND-Series service manual...

  • Page 16: Exit Lock With Request-To-Exit

    24085078 Gauge insert 23988066 Slide N523-149 Insert, inside hub N523-160 * Not sold separately as a part. ** For RX details, see Request-to-exit feature on page 106.  Designates new parts or assemblies. Schlage • ND-Series service manual • 17...

  • Page 17: Exit Lock— Electrically Locked (Fail Safe) Or Electrically

    Outside electrified spindle N523-019 Electrified motor assembly N223-062 ** Slide N523-149 Not sold separately as a part. Electrified locks 105. ** For electrified lock details, see on page  Designates new parts or assemblies. 18 • Schlage • ND-Series service manual...

  • Page 18: Unlocked (Fail Secure)

    N523-025 Not sold separately as a part. ** For RX details, see Request-to-exit feature on page 106. For electrified lock details, see Electrified locks on page 105.  Designates new parts or assemblies. Schlage • ND-Series service manual • 19...

  • Page 19: Single Dummy Trim

    ND170 Description Part number Description Part number Spindle pin C604-340* Dummy insert N523-069 Spring cage assembly N123-019* Not sold separately as a part. For mounting two ND170 as double trim, see page 58. 20 • Schlage • ND-Series service manual...

  • Page 20: Exit Lock With Blank Plate

    Slide clip N523-025 Chassis screw L583-454 Adjustment plate N523-054 Outside housing 24088544 Spindle N523-177  Inside hub 24085037 Gauge insert 23988066 Slide N523-149 Insert, inside hub N523-160 * Not sold separately as a part. Schlage • ND-Series service manual • 21...

  • Page 21: Special— Classroom Exit Lock

    Chassis screw L583-454 Slide clip N523-025 Keycam assembly N123-010 Adjustment plate N523-054 Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160* Inside hub 24085060 Not sold separately as a part. 22 • Schlage • ND-Series service manual...
  • Page 22 Chassis screw L583-454 Slide clip N523-025 Keycam assembly N123-008 Adjustment plate N523-054 Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160* Inside hub 24085060 Not sold separately as a part. Schlage • ND-Series service manual • 23...

  • Page 23: Patio, Bath/Bedroom Privacy And Hospital Privacy Lock

    Adjustment plate N523-054 Keycam assembly N123-045 Spindle N523-177  Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. 24 • Schlage • ND-Series service manual...

  • Page 24: Time Out Lock With Vandlgard

    Adjustment plate N523-054 Spindle N523-013 Spindle N523-177  Outside housing 24088544 Gauge insert 23988066 Inside hub 24085037 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 25...

  • Page 25: Entrance/Office And Entrance Lock

    Adjustment plate N523-054 Keycam assembly N123-007 Spindle N523-177  Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160* Not sold separately as a part.  Designates new parts or assemblies. 26 • Schlage • ND-Series service manual...

  • Page 26: Vestibule Lock

    Outside housing 24088544 Cam pin N523-065 Inside hub 24085037 N523-066 Slide N523-149 Gauge insert 23988066 Slide clip N523-025 Insert, inside hub N523-160* Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 27...

  • Page 27: Store Lock

    Slide clip N523-025 Keycam assembly N123-076 Adjustment plate N523-054 Spindle N523-013 Plunger bar N523-067 Outside housing 24088544 Gauge insert 23988066 Inside hub 24085060 Insert, inside hub N523-160* Not sold separately as a part. 28 • Schlage • ND-Series service manual...
  • Page 28 Adjustment plate N523-054 Spindle N523-013 Spindle N523-177  Outside housing 24088544 Gauge insert 23988066 Inside hub 24085037 Insert, inside hub N523-160* Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 29...
  • Page 29 L583-454 Slide N523-149 Keycam assembly N123-008 Slide clip N523-025 Keycam assembly N123-010 Adjustment plate N523-054 Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160* Not sold separately as a part. 30 • Schlage • ND-Series service manual...

  • Page 30: Special— Communicating Lock

    Chassis screw L583-454 Slide clip N523-025 Keycam assembly N123-010 Adjustment plate N523-054 Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160* Inside hub 24085060 Not sold separately as a part. Schlage • ND-Series service manual • 31...

  • Page 31: Special— Communicating Lock With Vandlgard

    Chassis screw L583-454 Slide clip N523-025 Keycam assembly N123-012 Adjustment plate N523-054 Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160 * Inside hub 24085060 Not sold separately as a part. 32 • Schlage • ND-Series service manual...

  • Page 32: Corridor Lock

    Adjustment plate N523-054 Keycam assembly N123-010 Spindle N523-177  Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 33...
  • Page 33 Spindle N523-013 Plunger bar N523-067 Outside housing 24088544 Gauge insert 23988066 Inside hub 24085037 Insert, inside hub N523-160 * Slide N523-149 Not sold separately as a part.  Designates new parts or assemblies. 34 • Schlage • ND-Series service manual...
  • Page 34 Adjustment plate N523-054 Spindle N523-013 Spindle N523-177  Outside housing 24088544 Gauge insert 23988066 Inside hub 24085037 Insert, inside hub N523-160* Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 35...
  • Page 35 24085078 Gauge insert 23988066 Slide N523-149 Insert, inside hub N523-160 * Not sold separately as a part. Request-to-exit feature 106. ** For RX details, see on page  Designates new parts or assemblies. 36 • Schlage • ND-Series service manual...

  • Page 36: Storeroom Lock— Electrically Locked (Fail Safe) Or

    Outside electrified spindle N523-019 Electrified motor assembly N223-062** Slide N523-149 Not sold separately as a part. ** For electrified lock details, see Electrified locks on page 105.  Designates new parts or assemblies. Schlage • ND-Series service manual • 37...
  • Page 37 N523-025 Not sold separately as a part. ** For RX details, see Request-to-exit feature on page 106. For electrified lock details, see Electrified locks on page 105.  Designates new parts or assemblies. 38 • Schlage • ND-Series service manual...
  • Page 38 Chassis screw L583-454 Slide clip N523-025 Keycam assembly N123-008 Adjustment plate N523-054 Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160 * Inside hub 24085060 Not sold separately as a part. Schlage • ND-Series service manual • 39...

  • Page 39: Faculty Restroom Lock

    Adjustment plate N523-054 Keycam assembly N123-055 Spindle N523-177  Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. 40 • Schlage • ND-Series service manual...

  • Page 40: Entrance/Office And Entrance Lock With Vandlgard

    Adjustment plate N523-054 Keycam assembly N123-011 Spindle N523-177  Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 41...
  • Page 41 24088544 Cam pin N523-065 Inside hub 24085037 N523-066 Slide N523-149 Gauge insert 23988066 Slide clip N523-025 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. 42 • Schlage • ND-Series service manual...
  • Page 42 Adjustment plate N523-054 Spindle N523-013 Spindle N523-177  Outside housing 24088544 Gauge insert 23988066 Inside hub 24085037 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 43...

  • Page 43: Classroom Security Lock With Vandlgard

    Spindle N523-013 Plunger bar N523-067 Outside housing 24088544 Gauge insert 23988066 Inside hub 24085037 Insert, inside hub N523-160 * Slide N523-149 Not sold separately as a part.  Designates new parts or assemblies. 44 • Schlage • ND-Series service manual...

  • Page 44: Storeroom Lock With Vandlgard

    Adjustment plate N523-054 Spindle N523-013 Spindle N523-177  Outside housing 24088544 Gauge insert 23988066 Inside hub 24085037 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 45...
  • Page 45 24085078 Gauge insert 23988066 Slide N523-149 Insert, inside hub N523-160 * Not sold separately as a part. Request-to-exit feature 106. ** For RX details, see on page  Designates new parts or assemblies. 46 • Schlage • ND-Series service manual...
  • Page 46 Outside electrified spindle N523-019 Electrified motor assembly –Vandlgard N223-063** Slide N523-149 Not sold separately as a part. ** For electrified lock details, see Electrified locks on page 105.  Designates new parts or assemblies. Schlage • ND-Series service manual • 47...
  • Page 47 N223-063** Slide clip N523-025 Not sold separately as a part. ** For RX details, see “Request-to-exit feature”. For electrified lock details, see Electrified locks on page 105.  Designates new parts or assemblies. 48 • Schlage • ND-Series service manual...
  • Page 48 Adjustment plate N523-054 Keycam assembly N123-097 Spindle N523-177  Spindle N523-013 Gauge insert 23988066 Outside housing 24088544 Insert, inside hub N523-160 * Not sold separately as a part.  Designates new parts or assemblies. Schlage • ND-Series service manual • 49...
  • Page 49 50 • Schlage • ND-Series service manual...
  • Page 50 Trim assemblies Passage latch 53 Passage latch with request-to-exit 54 Exit lock 55 Exit lock with request-to-exit 56 Exit lock—electrically locked (fail safe) or electrically unlocked (fail secure) Exit lock— electrically locked (fail safe) or electrically unlocked (fail secure) with request-to-exit 58 Single dummy trim 59 Exit lock with blank plate 60 Special—classroom exit lock...
  • Page 51 N523-021 Inside spring cage assembly—standard N523-221  Strike screws C603-256 Chassis 24088254* Adjustment plate screws N523-240  Anti-rotation plate N523-055 Chassis part number is for reference only.  Designates new parts or assemblies. 52 • Schlage • ND-Series service manual...
  • Page 52 Chassis 24088429* Adjustment plate screws N523-240  Anti-rotation plate N523-055 Chassis part number is for reference only. ** For RX details, see Request-to-exit feature on page 106.  Designates new parts or assemblies. Schlage • ND-Series service manual • 53...
  • Page 53 N523-221  Spring, plunger C503-331 Chassis 24088262* Catch stop N523-041 Anti-rotation plate N523-055 Adjustment plate screws N523-240  Deadlatch 13-247  Chassis part number is for reference only.  Designates new parts or assemblies. 54 • Schlage • ND-Series service manual...
  • Page 54 Anti-rotation plate N523-131 Adjustment plate screws N523-240  Deadlatch 13-247  Chassis part number is for reference only. ** For RX details, see Request-to-exit feature on page 106.  Designates new parts or assemblies. Schlage • ND-Series service manual • 55...
  • Page 55 N523-041 Anti-rotation plate N523-055 Adjustment plate screws N523-240  Chassis part number is for reference only. ** For electrified lock details, see Electrified locks on page 105.  Designates new parts or assemblies. 56 • Schlage • ND-Series service manual...
  • Page 56 Chassis part number is for reference only. ** For electrified lock details, see Electrified locks on page 105. For RX details, see Request-to-exit feature on page 106.  Designates new parts or assemblies. Schlage • ND-Series service manual • 57...
  • Page 57 Part number Letter Description Part number Inside lever—closed 03-230  Washer A501-171 Rose 03-042 Spring cage assembly, dummy N523-223  Dummy mounting screws L583-133 Dummy through bolt N523-092  Designates new parts or assemblies. 58 • Schlage • ND-Series service manual...
  • Page 58 Inside spring cage assembly—standard N523-221  Mounting screws N523-021 Chassis 24088296* Strike screws C603-256 Anti-rotation plate N523-055 Blank plate N523-002 Deadlatch 13-247  Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 59...
  • Page 59 13-247  Blank plate N523-002 √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 60 • Schlage • ND-Series service manual...
  • Page 60 13-247  Blank plate N523-002 √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 61...
  • Page 61 Spring, plunger C503-331 Anti-rotation plate N523-055 Catch stop N523-041 Deadlatch 13-247  Adjustment plate screws N523-240  Strike assembly 10-025 Chassis part number is for reference only.  Designates new parts or assemblies. 62 • Schlage • ND-Series service manual...
  • Page 62 N523-020 Anti-rotation plate N523-055 Emergency button and plunger N123-034 Springlatch 13-248  Adjustment plate screws N523-240  Strike assembly 10-025 Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 63...
  • Page 63 Anti-rotation plate N523-055 Emergency turn button and plunger N123-035 Springlatch 13-248  Adjustment plate screws N523-240  Strike assembly 10-025 Chassis part number is for reference only.  Designates new parts or assemblies. 64 • Schlage • ND-Series service manual...
  • Page 64 Spring, plunger C503-331 Anti-rotation plate N523-055 Catch stop N523-041 Deadlatch 13-247  Adjustment plate screws N523-240  Strike assembly 10-025 Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 65...
  • Page 65 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 66 • Schlage • ND-Series service manual...
  • Page 66 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 67...
  • Page 67 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 68 • Schlage • ND-Series service manual...
  • Page 68 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 69...
  • Page 69 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 70 • Schlage • ND-Series service manual...
  • Page 70 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 71...
  • Page 71 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 72 • Schlage • ND-Series service manual...
  • Page 72 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 73...
  • Page 73 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 74 • Schlage • ND-Series service manual...
  • Page 74 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 75...
  • Page 75 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 76 • Schlage • ND-Series service manual...
  • Page 76 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 77...
  • Page 77 For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see page 98. Chassis part number is for reference only. ** For RX details, see Request-to-exit feature on page 106.  Designates new parts or assemblies. 78 • Schlage • ND-Series service manual...
  • Page 78 For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only. ** For electrified lock details, see Electrified locks on page 105.  Designates new parts or assemblies. Schlage • ND-Series service manual • 79...
  • Page 79 Chassis part number is for reference only. Electrified locks 105. Request-to-exit feature 106. ** For electrified lock details, see on page For RX details, see on page  Designates new parts or assemblies. 80 • Schlage • ND-Series service manual...
  • Page 80 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 81...
  • Page 81 Cylinder—6-pin indicator 23-000 Anti-rotation plate N523-055 Push button with spanner access N523-211  Deadlatch 13-247  Adjustment plate screws N523-240  Chassis part number is for reference only.  Designates new parts or assemblies. 82 • Schlage • ND-Series service manual...
  • Page 82 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 83...
  • Page 83 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 84 • Schlage • ND-Series service manual...
  • Page 84 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 85...
  • Page 85 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 86 • Schlage • ND-Series service manual...
  • Page 86 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. Schlage • ND-Series service manual • 87...
  • Page 87 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 88 • Schlage • ND-Series service manual...
  • Page 88 For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only. ** For RX details, see Request-to-exit feature on page 106.  Designates new parts or assemblies. Schlage • ND-Series service manual • 89...
  • Page 89 For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only. ** For electrified lock details, see Electrified locks on page 105.  Designates new parts or assemblies. 90 • Schlage • ND-Series service manual...
  • Page 90 Chassis part number is for reference only. ** For electrified lock details, see Electrified locks on page 105. For RX details, see Request-to-exit feature on page 106.  Designates new parts or assemblies. Schlage • ND-Series service manual • 91...
  • Page 91 Adjustment plate screws N523-240  √ For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see page 98. Chassis part number is for reference only.  Designates new parts or assemblies. 92 • Schlage • ND-Series service manual...

  • Page 92: Conversion

    N123-021 BD, BDC, GD, HD N123-056 N123-057 N523-218 N523-222 LD SAR, LD C06 N123-064 N123-067 JD CO6, JD SAR, JD CO7 N123-066 N123-069 JD YA6, JD YA7, JD MED N123-065 N523-224 N123-068 N523-225 Schlage • ND-Series service manual • 93...

  • Page 93: Lever Conversion

    ATH, RHO, SPA, TLR, OME 03-231 Cylinder – Schlage FSIC (R, J, T) 03-032 ATH, RHO, SPA, TLR, OME 03-232 Cylinder – Schlage SFIC (B, BDC, G, H) 03-000 ATH, RHO, SPA, TLR, OME 03-200 Cylinder – Corbin Russwin ®...

  • Page 94: Parts And Kits

    Prior versions of ND locks may be upgraded to new parts and assemblies with conversion kits consisting of a spring cage assembly and lever assembly. Kits may be ordered for one or both sides of the lock. Kits are available for all lever designs. For allowable finishes, refer to current Schlage Commercial Price Book. 04-400, Outside conversion kit...

  • Page 95: Levers

    * Meets California Fire Code for ” or less return to the door. Tactile warning Not available on Omega levers Tubular lever Rhodes lever Preface design code for tactile warning levers Athens Rhodes Sparta Tubular 96 • Schlage • ND-Series service manual...

  • Page 96: Roses

    ATH, RHO, locks with OME SPA or TLR levers. levers. Size: 3 M\zn ” dia. Size: 3 M\zn ” dia. Available in 626 only. Available in 626 only. Schlage • ND-Series service manual • 97...

  • Page 97: Full Size Ic And Sfic (Small Format Interchangeable Core) Configurations

    N523-222 Inside spring cage—SFIC N523-222 Anti-rotation plate N523-055 Anti-rotation plate N523-055 Mounting screw N523-021 Mounting screw N523-021 Cylinder—full size IC 23-030 Cylinder—SFIC 80-037 IC driver N523-127 Small format IC spacer (6-pin only) D500-000 98 • Schlage • ND-Series service manual...

  • Page 98: Cylinders

    Small format interchangeable cores Everest Combinated, Best Keyway 7-Pin Best Keyway 6-Pin ® ® ® 80-037 Uncombinated, 80-033 Uncombinated, 80-043 Also available in uncombinated, (80-036) Cylinder tailpieces Cylinder Format Tailpiece Schlage, SCH-FSIC N523-127 Schlage, SCH-SFIC N523-091 Schlage • ND-Series service manual • 99...

  • Page 99: Competitor Cylinder Options

    Medeco 31 and Yale Full Size Interchangeable 03-255 09-061 Core 6-pin cylinder JD MED Medeco 32 Full Size Interchangeable Core 03-237 10-143 N523-224 N523-225 JD YA7 Yale Full Size Interchangeable Core 7-pin cylinder 03-236 10-142 100 • Schlage • ND-Series service manual...

  • Page 100: Latches

    Available in 605, 606, Available in 605, 606, ordered separately. 612, 613, 619, 625, 612, 613, 619, 625, 626. 626. Available in 605, 606, 612, 613, 619, 625, 626. ANSI PlastIc strike box, K510-066 Schlage • ND-Series service manual • 101...
  • Page 101 Screw packs, Torx ® Part no. Description Contents C203-311 Latch and strike (includes tool) (4) C503-766 (T-15) C203-312 Latch and ANSI strike (2) C503-766 (T-15) (includes tool) (2) L583-371 (T-20) Specify lip length. Specify finish. 102 • Schlage • ND-Series service manual...
  • Page 102 Installation tools and kits Boring jigs and tools are designed to provide fast and accurate lock installation. Complete kits or individual tools can be ordered for preparing doors and jambs for Schlage products. Pin wrench, N523-108 Old style pin wrench, M504-271...
  • Page 103 Plunger assembly N123-085 Plunger assembly N523-177 Spindle, inside N523-013 Spindle, outside N523-019 Spindle, outside, electrified N123-020 Package, screw N123-040 Package, screw 24085037 Hub, inside 24085060 Hub, inside, double cylinder 24088544 Housing, outside Bottom 104 • Schlage • ND-Series service manual...

  • Page 104: Electrified Locks

    RX NO (normally open) Grey RX NC (normally closed) White RX COM (common for RX) 6, 7, 8 Not used EPT or electrified hinge Variable length wiring harness 6” wiring (6" to 192") harness power supply Schlage • ND-Series service manual • 105...

  • Page 105: Request-To-Exit Feature

    (21 mm) Latch ³⁄₄" (19) ¹³⁄₁₆" (21 mm) 1³⁄₈" (35 mm) ³⁄₈" RX wire harness RH or LHR ¹¹⁄₁₆" (10) ⁷⁄₈" (22 mm) (17 mm) drill thru 2¹⁄₈" (54 mm) ⁵⁄₁₆" (8 mm) 106 • Schlage • ND-Series service manual...

  • Page 106: Finishes

    (US 15) Satin nickel, clear coated 643e (US 11) Aged bronze Ordering procedures To order Schlage products, descriptive data should be in the same sequence as shown below. Line Item Product Outside Inside Hand Latch Strike...

  • Page 107: Limited Warranty

    Fax (800) 452-0665 exclusion or limitation may not apply to you. The Schlage Lock Company reserves the right to make changes in The provisions of this warranty do not apply to Products: (i) used designs and specifications or to make additions or improvements for purposes for which they are not designed or intended;...
  • Page 108 As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA , Interflex , LCN , Schlage and Von Duprin ® ® ® ®...

This manual is also suitable for:

Nd12Nd170Nd12elNd25Nd30Nd12eu ... Show all

Table of Contents