Freewing F-14 TOMCAT User Manual page 4

Fuselage Assembly
•Fuselage
Joining the front and rear
•Rudder
Rudder servo Installation
1 .Use a servo tester or radio to center the
servo arm.
2.Use glue to attach the 17g servo box (C) and
rudder horn (D) to the rudder.
3.lnsert the servo into the 17g servo box (C),
and press the servo cable i nto the servo
cable channel (F), cover the 17g servo
with the cover (B) , and use 2 screws (A) to
secure the cover to the servo box.
4.Use rudder pushrod (E) to connect the servo
arm to the rudder horn (D).
Rudder Installation
A-Screw (PA3x8mm Bpc s)
B - Servo, LED light extension cable
C -Servo, LED light cable
D- Rudder
A�
F-14Tomcat
Item No., FJ308
Version No., FJ308-VO I
fuselage
I /
,,/
A-Screw (PWA1 .7•5mm 2pcs)
B -Servo cover
C-Servo box
D - Rudder horn
E - Rudder pushrod
F -Servo cable trough
Rudder push rod size
Pushrod diameter : 0 1.5 mm
r..___
t
Rudder push rod mounting hole
95mm
(3-415")�
-3-
N
"·